Fiche individuelle

This paper studies the electromagnetic noise behaviour of a 5 phase Interior Permanent Magnet Machine with fractional slot concentrated winding designed. A numerical model is used for analysing the torque characteristics and electromagnetic forces. The vibro-acoustics and mechanical resonance of the model are then investigated analytically. The purpose of both analyses is to identify the source of electromagnetic noise within the machine. A sonogram is also carried out on the existing prototype to correlate it with the numerical results. Finally, the choice of the appropriate method to attenuate noise for this case study is elaborated.

This paper studies the electromagnetic noise behaviour of a 5 phase Interior Permanent Magnet Machine with fractional slot concentrated winding designed. A numerical model is used for analysing the torque characteristics and electromagnetic forces. The vibro-acoustics and mechanical resonance of the model are then investigated analytically. The purpose of both analyses is to identify the source of electromagnetic noise within the machine. A sonogram is also carried out on the existing prototype to correlate it with the numerical results. Finally, the choice of the appropriate method to attenuate noise for this case study is elaborated.

Abstract—The presented paper proposes a topology optimisation methodology based on the density-based method SIMP, and applied to a numerical example to validate the former. The approach and methodology are detailed, and the results for a 3D basic electromagnetic example are presented. The non-linear B(H) curve is also taken into account. Index Terms—gradient-based algorithm, relaxation of variables, SIMP density method, weighted objective sum

Abstract. This paper presents different approaches while using the SIMP density-based method for the Topology Optimisation (TO) of a 3D electromagnetic device. The methodology used for TO is also detailed in this paper. The initial model and the formulation of the problem are presented, and the results for two approaches are analysed. A Finite Element calculation code is coupled with a gradient-based algorithm to numerically execute the proposed methodology for TO. Keywords: 3D Finite Element Model, gradient-based fmincon SQP algorithm, SIMP density-based method, Topology Optimisation

This paper presents a methodology to optimise the topology of a 3D electromagnetic model to maximise Energy while constraining the Material Quantity. Variants of the material distribution method SIMP (Solid Isotropic Material with Penalisation) are discussed to enhance convergence of variables. The aim is to improve the results by analysing the behaviour of the design variables w.r.t the objectives. This allows correct parameter tweaking and finding the best variant for the SIMP Method respective to our methodology. This would help reduce the time consumed to find the best solution and therefore enhance the accuracy of the results.

L’Optimisation Topologique (OT) est un sujet en plein essor qui suscite l’intérêt de nombreux chercheurs depuis ces deux dernières décennies dans le domaine de l’électromagnétisme. L’OT représente une méthode très attrayante et originale car elle permet de trouver des structures innovantes sans aucun a priori. Ce travail de thèse est orienté vers l’OT des dispositifs électromagnétiques en approfondissant plusieurs aspects du sujet. Tout d’abord, un outil d’OT est développé et testé, à partir des outils existant au L2EP. En effet, l’OT requiert un outil d’éléments finis et un outil d’optimisation devant être couplés. Une méthodologie originale d’OT fondée sur les principes de la Méthode de Densité est développée et testée. Un cas test académique est utilisé afin de tester et valider le couplage des outils et la méthodologie. Une approche visant à prendre en compte le comportement non-linéaire des matériaux ferromagnétiques avec nos outils OT est également mise en place. Ensuite, la méthode est appliquée afin d’optimiser un électroaimant en 3 dimensions, représentant un cas test proche de la réalité. Ce cas test permet de comparer les résultats avec un comportement linéaire et non-linéaire des matériaux. Diverses topologies sont présentées, par rapport aux différentes formulations du problème. Par la suite, la méthodologie est appliquée à un dispositif électromagnétique plus complexe : une Génératrice Synchrone à Pôles Saillants. Cet exemple nous permet de voir comment la définition du problème d’optimisation peut grandement affecter les résultats d’OT. Quelques topologies sont présentées, et leur faisabilité est analysée Cas test cubique Electroaimant 3D Electromagnétisme Facteur de faisabilité Génératrice synchrone à pôles saillants Machines électriques Méthode de densité Méthode éléments finis Optimisation Topologique Optimisation mathématique Électroaimants Électromagnétisme Méthode des éléments finis Topology Optimisation (TO) is a fast growing topic that has been sparking the interest of many researchers for the past two decades in the electromagnetic community. Its attractiveness lies in the originality of finding innovative structures without any layout a priori. This thesis work is oriented towards the TO of electromagnetic devices by elaborating on various aspects of the subject. First of all, a tool for TO is developed and tested, based on the ‘home-made’ tools available at the L2EP. As TO requires a FE and an optimisation tool working together, a coupling is done using both. Furthermore, a TO methodology is developed and tested, based on the Density Method. An academic cubic test case is used to carry out all the tests, and validate the tools and methodology. An approach is also developed to consider the nonlinear behaviour of the ferromagnetic materials with our TO tools. Afterwards, the methodology is applied to a 3D electromagnet, which represents a more real test case. This test case also serves to compare the results with linear and nonlinear behaviour of the materials used. Various topologies are presented, for different problem formulations. Subsequently, the methodology is applied to a more complex electromagnetic device: a Salient Pole Synchronous Generator. This example allows us to see how the problem definition can largely affect TO results. Some topologies are presented and their viability is discussed.